What parameters are required for the selection of a remote transmission glass rotor flowmeter?

『Remote transmission glass rotor flowmeter』Related information(v cone flow meter|rotary gas meter|gallon meter|gear meter|metal tube rotameter|glass tube rotameter|nutating disk meter|transit time ultrasonic flow meter|wedge flow meter|pd meters|hydraulic flow meter|ultrasonic water flow meter|water flow meter|air flow meter|magnetic water flow meter|oxygen flow meter|gas flow meter|argon flow meter|air velocity meter|gasoline flow meter|fuel flow meter|ultrasonic water meter|digital water meter|nitrogen flow meter|solid flow meter|Oxygen tank flow meter|digital water flow meter|diesel fuel flow meter|steam flow meter|02 flow meter|compressed air flow meter|oil flow meter|liquid flow meter)

What are the characteristics of the remote transmission glass rotor flowmeter? The characteristics of the remote transmission glass rotor flowmeter mainly include the following: no moving parts, durable design: The remote transmission glass rotor flowmeter adopts a design without moving parts and pores, which makes the flowmeter wear free, dirt resistant, and does not require mechanical maintenance during use, greatly extending its service life. Micro power consumption technology, long-lasting endurance: This flow mode rolling meter adopts micro power consumption high-tech, which enables the battery powered on-site display flowmeter to operate continuously for more than two years. This feature not only reduces the frequency of battery replacement, but also improves the reliability and stability of the equipment. Integrated design, strong anti-interference ability: The temperature and voltage compensation of the remote transmission glass rotor flowmeter is integrated, making its current output an electrically isolated type with good common mode interference suppression capability. This design can effectively resist external electromagnetic interference, ensuring the accuracy and stability of measurement results. Simultaneously display flow rate value and cumulative flow rate value: This flowmeter can simultaneously display the current flow rate value and cumulative flow rate value, without the need for users to switch between them. This feature enables users to easily obtain the required information and improves work efficiency. Anti vibration probe to eliminate the influence of external vibration: The remote transmission glass rotor flowmeter adopts an anti vibration probe design, which can effectively eliminate the influence of external vibration on the measurement results. This feature enables the flowmeter to maintain stable measurement performance even in complex working environments. In summary, the remote transmission type glass rotor flowmeter has broad application prospects and advantages in the field of fluid measurement due to its characteristics of no moving parts, low power consumption technology, integrated design, simultaneous display of flow value and cumulative flow value, and anti vibration probe.

2. Manufacturer of Doppler flowmeter

3. Check whether the rotor flowmeter looks at the top or bottom

The rotor flowmeter should look at the scale value corresponding to the upper end face of the J-carried float. The accurate reading method is to keep the line of sight level with the upper surface of the float (i.e. the plane with the maximum diameter), and then read the corresponding scale value of this plane on the scale tube. The structure and principle of the rotor flowmeter are mainly composed of a conical tube with gradually increasing diameter from bottom to top and an inner float. When the fluid flows from bottom to top, it will push the float up. The higher the float rises, the larger the annular area between it and the conical tube wall. When the gravity, buoyancy, and fluid thrust of the float reach equilibrium, the float stabilizes at a certain height, and the scale corresponding to its upper end surface represents the current flow rate value. The installation direction and reading angle of the flowmeter must be perpendicular, and the fluid direction is from bottom to top. If the reading is observed from an oblique angle above or below, there will be a viewing angle error, resulting i

『SILVER Official Website SERVICE』